SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2006SUBURBAN C1500, 5.3 ZREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 2009 (WIRING SYSTEMS AND POWER MANAGEMENT - INLINE HARNESS CONNECTOR END VIEWS - X100 THROUGH X275)INLINE HARNESS CONNECTOR END VIEWSX212 INSTRUMENT PANEL HARNESS TO INSTRUMENT PANEL EXTENSION HARNESS (WITHOUT STZ OR Y91)
2006 Chevrolet Suburban C1500, 5.3 Z

X212 Instrument Panel Harness to Instrument Panel Extension Harness (without STZ or Y91)

2006 Chevrolet Suburban C1500, 5.3 ZSECTION X212 Instrument Panel Harness to Instrument Panel Extension Harness (without STZ or Y91)
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
GM1866035
GM2127932
Connector Part Information
  • Harness Type: Instrument Panel
  • OEM Connector: 13601512
  • Service Connector: Service by Harness - See Part Catalog
  • Description: 14-Way F Micro-Pack 64 Series (BK)
  • Harness Type: Instrument Panel
  • OEM Connector: 15491285
  • Service Connector: 15136073
  • Description: 16-Way F Micro-Pack 64 Series (BK)
 Connector Part Information
  • Harness Type: Instrument Panel Extension
  • OEM Connector: 13669368
  • Service Connector: 89047362
  • Description: 30-Way M 0.64 1.5 Series (BK)
Terminal Part Information
  • Pins: 1, 8 (14-Way)
  • Terminated Lead: 13575735
  • Release Tool: J-38125-553
  • Diagnostic Test Probe: J-35616-2A (GY)
  • Terminal/Tray: 12191812/19
  • Core/Insulation Crimp: C/A
  • Pins: 2, 3, 6, 7, 9, 10, 13 (14-Way), 5, 6, 13, 14 (16-Way)
  • Terminated Lead: 13575867
  • Release Tool: J-38125-215A
  • Diagnostic Test Probe: J-35616-64B (L-BU)
  • Terminal/Tray: SAIT-A03T-M064/14
  • Core/Insulation Crimp: P/P
 Terminal Part Information
  • Pins: B1, B8
  • Terminated Lead: 13575502
  • Release Tool: J-38125-553
  • Diagnostic Test Probe: J-35616-3 (GY)
  • Terminal/Tray: 15304702/19
  • Core/Insulation Crimp: 2/4
  • Pins: A5, A6, A13, A14, B2, B3, B6, B7, B9, B10, B13
  • Terminated Lead: Service by Harness - See Part Catalog
  • Release Tool: J-38125-215A
  • Diagnostic Test Probe: J-35616-65B (L-BU)
  • Terminal/Tray: 7114-4618-02/27
  • Core/Insulation Crimp: P/P
X212 Instrument Panel Harness to Instrument Panel Extension Harness (without STZ or Y91)

Pin Wire Circuit Function Pin Wire Circuit Function
1-4 - - Not Used A1-A4 - - Not Used
5 0.5 BN 199 Left Rear Speaker Output (+) A5 0.5 BN 199 Left Rear Speaker Output (+)
6 0.5 D-BU 46 Right Rear Speaker Output (+) A6 0.5 D-BU 46 Right Rear Speaker Output (+)
7-12 - - Not Used A7-A12 - - Not Used
13 0.5 YE 116 Left Rear Speaker Output (-) A13 0.5 YE 116 Left Rear Speaker Output (-)
14 0.5 L-BU 115 Right Rear Speaker Output (-) A14 0.5 L-BU 115 Right Rear Speaker Output (-)
15-16 - - Not Used A15-A16 - - Not Used
1 1 RD/WH 340 Battery Positive Voltage B1 1 RD/WH 340 Battery Positive Voltage
2 0.5 TN 201 Left Front Speaker Output (+) B2 0.5 TN 201 Left Front Speaker Output (+)
3 0.5 L-GN 200 Right Front Speaker Output (+) (HP2) B3 0.5 L-GN 200 Right Front Speaker Output (+)
4-5 - - Not Used B4-B5 - - Not Used
6 0.35 WH 7066 Entertainment Remote Enable Signal (U84) B6 0.35 WH 7066 Entertainment Remote Enable Signal (U84)
7 0.35 YE 6817 LED Backlight Dimming Control B7 0.35 YE 6817 LED Backlight Dimming Control
8 1 BK 2550 Ground B8 1 BK 2550 Ground
9 0.5 GY 118 Left Front Speaker Output (-) B9 0.5 GY 118 Left Front Speaker Output (-)
10 0.5 D-GN 117 Right Front Speaker Output (-) B10 0.5 D-GN 117 Right Front Speaker Output (-)
11-12 - - Not Used B11-B12 - - Not Used
13 0.35 D-GN 5060 Low Speed GMLAN Serial Data B13 0.35 D-GN 5060 Low Speed GMLAN Serial Data
14 - - Not Used B14 - - Not Used
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.