SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2006SUBURBAN C1500, 5.3 ZREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1981 (WIRING SYSTEMS AND POWER MANAGEMENT - INLINE HARNESS CONNECTOR END VIEWS - X276 THROUGH X902)INLINE HARNESS CONNECTOR END VIEWSX404 CHMSL JUMPER HARNESS TO BODY HARNESS (E52 OR TB7)
2006 Chevrolet Suburban C1500, 5.3 Z

X404 CHMSL Jumper Harness to Body Harness (E52 or TB7)

2006 Chevrolet Suburban C1500, 5.3 ZSECTION X404 CHMSL Jumper Harness to Body Harness (E52 or TB7)
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
GM82383
GM35441
Connector Part Information
  • Harness Type: CHMSL Jumper
  • OEM Connector: 12047662
  • Service Connector: 12085535
  • Description: 2-Way F Metri-Pack 150 Series (BK)
 Connector Part Information
  • Harness Type: Body
  • OEM Connector: 12047663
  • Service Connector: 12085481
  • Description: 2-Way M Metri-Pack 150 Series (BK)
Terminal Part Information
  • Terminated Lead: 13575464
  • Release Tool: J-38125-12A
  • Diagnostic Test Probe: J-35616-14 (GN)
  • Terminal/Tray: 15326030/5
  • Core/Insulation Crimp: E/C
 Terminal Part Information
  • Terminated Lead: 13575462
  • Release Tool: J-38125-12A
  • Diagnostic Test Probe: J-35616-3 (GY)
  • Terminal/Tray: 12047581/2
  • Core/Insulation Crimp: E/C
X404 CHMSL Jumper Harness to Body Harness (E52 or TB7)

Pin Wire Circuit Function Pin Wire Circuit Function
A 0.5 L-BU 1320 CHMSL Control A 0.5 L-BU 1320 CHMSL Control
B 0.5 BK 1450 Ground B 0.5 BK 1450 Ground
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.