Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2006SUBURBAN C1500, 5.3 ZREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1981 (WIRING SYSTEMS AND POWER MANAGEMENT - INLINE HARNESS CONNECTOR END VIEWS - X276 THROUGH X902)INLINE HARNESS CONNECTOR END VIEWSX374 DVD SIGNAL CABLE 3B TO DVD SIGNAL CABLE 2B (SPO ACCESSORY)
2006 Chevrolet Suburban C1500, 5.3 Z
X374 DVD Signal Cable 3B to DVD Signal Cable 2B (SPO Accessory)
2006 Chevrolet Suburban C1500, 5.3 ZSECTION X374 DVD Signal Cable 3B to DVD Signal Cable 2B (SPO Accessory)
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Connector Part Information
|
Connector Part Information
|
Terminal Part Information
|
Terminal Part Information
|
X374 DVD Signal Cable 3B to DVD Signal Cable 2B (SPO Accessory)
| Pin | Wire | Circuit | Function | Pin | Wire | Circuit | Function |
|---|---|---|---|---|---|---|---|
| 1 | RD | - | I2C Data | 1 | RD | - | I2C Data |
| 2 | BK | - | I2C Clock Signal | 2 | BK | - | I2C Clock Signal |
| 3 | WH | - | Left Audio Signal (+) | 3 | WH | - | Left Audio Signal (+) |
| 4 | RD | - | Right Audio Signal (+) | 4 | RD | - | Right Audio Signal (+) |
| 5 | YE | - | DVD Video Signal (+) | 5 | YE | - | DVD Video Signal (+) |
| 6 | BK | - | DVD Video Signal (-) | 6 | BK | - | DVD Video Signal (-) |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.