SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2006SUBURBAN C1500, 5.3 ZREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1981 (WIRING SYSTEMS AND POWER MANAGEMENT - INLINE HARNESS CONNECTOR END VIEWS - X276 THROUGH X902)INLINE HARNESS CONNECTOR END VIEWSX330 ACCESSORY HEATED SEAT BODY JUMPER TO DRIVER SIDE HEATED SEAT JUMPER (SPO ACCESSORY - HEATED SEATS)
2006 Chevrolet Suburban C1500, 5.3 Z

X330 Accessory Heated Seat Body Jumper to Driver Side Heated Seat Jumper (SPO Accessory - Heated Seats)

2006 Chevrolet Suburban C1500, 5.3 ZSECTION X330 Accessory Heated Seat Body Jumper to Driver Side Heated Seat Jumper (SPO Accessory - Heated Seats)
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
GM823321
GM823318
Connector Part Information
  • Harness Type: Accessory Heated Seat Body Jumper
  • OEM Connector: 15326952
  • Service Connector: 15306426
  • Description: 16-Way F GT 280 Series (BK)
 Connector Part Information
  • Harness Type: Driver Side Heated Seat Jumper
  • OEM Connector: 15326956
  • Service Connector: 15326956
  • Description: 16-Way M GT 280 Series (BK)
Terminal Part Information
  • Terminal/Tray: 15304711/8
  • Core/Insulation Crimp: E/A
  • Release Tool/Test Probe: 15315247/J-35616-4A (PU)
 Terminal Part Information
  • Terminal/Tray: 15304722/8
  • Core/Insulation Crimp: E/C
  • Release Tool/Test Probe: 15315247/J-35616-5 (PU)
X330 Accessory Heated Seat Body Jumper to Driver Side Heated Seat Jumper (SPO Accessory - Heated Seats)

Pin Wire Circuit Function Pin Wire Circuit Function
A 0.35 GY 6175 Not Used A 0.35 GY 6175 Not Used
B 0.35 D-BU 6172 Not Used B 0.35 D-BU 6172 Not Used
C 0.35 PU 6174 Not Used C 0.35 PU 6174 Not Used
D 0.35 BN 6173 Not Used D 0.35 BN 6173 Not Used
E 0.35 L-BU 1662 Not Used E 0.35 L-BU 1662 Not Used
F 0.35 WH/BK 6177 Not Used F 0.35 WH/BK 6177 Not Used
G 0.35 D-GN 1661 Not Used G 0.35 D-GN 1661 Not Used
H-J - - Not Used H-J - - Not Used
K 0.35 GY 6182 Not Used K 0.35 GY 6182 Not Used
L 0.35 D-BU 6180 Not Used L 0.35 D-BU 6180 Not Used
M 0.35 PU 6181 Not Used M 0.35 PU 6181 Not Used
N 0.35 BN 6179 Not Used N 0.35 BN 6179 Not Used
P 0.35 TN 1686 Not Used P 0.35 TN 1686 Not Used
R 0.35 WH/BK 6185 Not Used R 0.35 WH/BK 6185 Not Used
S 0.35 YE 1685 Not Used S 0.35 YE 1685 Not Used
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.