SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2006SUBURBAN C1500, 5.3 ZREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1981 (WIRING SYSTEMS AND POWER MANAGEMENT - INLINE HARNESS CONNECTOR END VIEWS - X276 THROUGH X902)INLINE HARNESS CONNECTOR END VIEWSX324 DRIVER SEAT HARNESS TO DRIVER SEAT JUMPER HARNESS (AN3)
2006 Chevrolet Suburban C1500, 5.3 Z

X324 Driver Seat Harness to Driver Seat Jumper Harness (AN3)

2006 Chevrolet Suburban C1500, 5.3 ZSECTION X324 Driver Seat Harness to Driver Seat Jumper Harness (AN3)
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
GM808699
GM655857
Connector Part Information
  • Harness Type: Driver Seat
  • OEM Connector: 15304692
  • Service Connector: 15304692
  • Description: 18-Way F Global Terminal/Mixed Series (BK)
 Connector Part Information
  • Harness Type: Driver Seat Jumper
  • OEM Connector: 15336468
  • Service Connector: 15336468
  • Description: 18-Way M GT 150 280 Series (BK)
Terminal Part Information
  • Pins: A3, A7, B3, B7-B8
  • Terminal/Tray: 12191812/19
  • Core/Insulation Crimp: E/C
  • Release Tool/Test Probe: 15315247/J-35616-2A (GY)
  • Pins: A4-A6, B4-B6
  • Terminal/Tray: 15304711/8
  • Core/Insulation Crimp: 2/A
  • Release Tool/Test Probe: 15315247/J-35616-4A (PU)
 Terminal Part Information
  • Pins: A3, A7, B3, B7-B8
  • Terminal/Tray: 15304702/19
  • Core/Insulation Crimp: E/C
  • Release Tool/Test Probe: 15315247/J-35616-3 (GY)
  • Pins: A4-A6, B4-B6
  • Terminal/Tray: 15304724/8
  • Core/Insulation Crimp: C/D
  • Release Tool/Test Probe: 15315247/J-35616-5 (PU)
X324 Driver Seat Harness to Driver Seat Jumper Harness (AN3)

Pin Wire Circuit Function Pin Wire Circuit Function
A1-A2 - - Not Used A1-A2 - - Not Used
A3 0.35 TN/BK 1062 Driver Seat Lumbar Vertical Position Sensor Signal A3 0.35 TN/BK 1062 Driver Seat Lumbar Vertical Position Sensor Signal
A4 1 PK 610 Driver Seat Lumbar Motor Rearward Control A4 2 PK 610 Driver Seat Lumbar Motor Rearward Control
A5 1 TN 768 Driver Seat Lumbar Motor Up Control A5 2 TN 768 Driver Seat Lumbar Motor Up Control
A6 1 L-BU 277 Driver Seat Recline Motor Rearward Control A6 2 L-BU 277 Driver Seat Recline Motor Rearward Control
A7 0.35 WH/BK 570 Driver Seat Recline Motor Position Sensor Signal A7 0.35 WH/BK 570 Driver Seat Recline Motor Position Sensor Signal
A8-A9 - - Not Used A8-A9 - - Not Used
B1-B2 - - Not Used B1-B2 - - Not Used
B3 0.35 YE 1063 Driver Seat Lumbar Horizontal Position Sensor B3 0.35 YE 1063 Driver Seat Lumbar Horizontal Position Sensor
B4 1 D-BU 611 Driver Seat Lumbar Motor Forward Control B4 2 D-BU 611 Driver Seat Lumbar Motor Forward Control
B5 1 PU 767 Driver Seat Lumbar Motor Down Control B5 2 PU 767 Driver Seat Lumbar Motor Down Control
B6 1 L-GN 276 Driver Seat Recline Motor Forward Control B6 2 L-GN 276 Driver Seat Recline Motor Forward Control
B7 0.35 GY 6206 Low Reference B7 0.35 GY 6206 Low Reference
B8 0.35 TN 6207 5-Volt Reference B8 0.35 TN 6207 5-Volt Reference
B9 - - Not Used B9 - - Not Used
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.