X313 Sunroof Harness (CF5) or Overhead Console Harness (TRW) to Right A-Pillar Harness

2006 Chevrolet Suburban C1500, 5.3 ZSECTION X313 Sunroof Harness (CF5) or Overhead Console Harness (TRW) to Right A-Pillar Harness
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
GM1333948
GM1385122
Connector Part Information
  • Harness Type: Sunroof (CF5)
  • Harness Type: Overhead Console (TRW)
  • OEM Connector: 15326893
  • Service Connector: 89046647
  • Description: 5-Way F GT 280 Series (BK)
Connector Part Information
  • Harness Type: Right A-Pillar
  • OEM Connector: 15326897
  • Service Connector: 88987846
  • Description: 5-Way M GT 280 Series (BK)
Terminal Part Information
  • Terminal/Tray: Service by Harness- See Part Catalog
  • Core/Insulation Crimp: Not Available
  • Release Tool/Test Probe: Not Available
Terminal Part Information
  • Pins: A, E
  • Terminated Lead: 13575510
  • Release Tool: J-38125-553
  • Diagnostic Test Probe: J-35616-5 (PU)
  • Terminal/Tray: 15304724/8
  • Core/Insulation Crimp: A/D
  • Pins: B-D
  • Terminated Lead: 13575507
  • Release Tool: J-38125-553
  • Diagnostic Test Probe: J-35616-5 (PU)
  • Terminal/Tray: 15304722/8
  • Core/Insulation Crimp: E/C
X313 Sunroof Harness (CF5) or Overhead Console Harness (TRW) to Right A-Pillar Harness

Pin Wire Circuit Function Pin Wire Circuit Function
A 2 RD/WH 3140 Battery Positive Voltage A 2 RD/WH 3140 Battery Positive Voltage
B 0.5 YE 43 Ignition Voltage (CF5) B 0.5 YE 43 Ignition Voltage (CF5 except EXP)
0.5 OG 300 Ignition Voltage (EXP with CF5)
C 0.5 BN/WH 230 Instrument Panel Lamp Dimming Control (CF5) C 0.35 BN/WH 230 Instrument Panel Lamp Dimming Control (CF5)
D 0.35 WH 5429 Ignition Voltage (CF5) D 0.35 WH 43 Ignition Voltage (EXP with CF5)
E 2 BK 1050 Ground (CF5) E 2 BK 1050 Ground (CF5)
3 BK 1050 Ground (TRW) 3 BK 1050 Ground (TRW)
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.