X309 Body Harness to Console Harness (UQS)

2006 Chevrolet Suburban C1500, 5.3 ZSECTION X309 Body Harness to Console Harness (UQS)
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
GM646374
GM715111
Connector Part Information
  • Harness Type: Body
  • OEM Connector: 15332145
  • Service Connector: 15306407
  • Description: 8-Way F GT 150 Series (BK)
Connector Part Information
  • Harness Type: Console
  • OEM Connector: 15332150
  • Service Connector: 88986250
  • Description: 8-Way M GT 150 Series (BK)
Terminal Part Information
  • Terminal: 12191812/19
  • Core/Insulation Crimp: C/A
  • Release Tool/Test Probe: 15315247/J-35616-2A (GY)
Terminal Part Information
  • Terminal: 15304702/19
  • Core/Insulation Crimp: 2/4
  • Release Tool/Test Probe: 15315247/J-35616-3 (GY)
X309 Body Harness to Console Harness (UQS)

Pin Wire Circuit Function Pin Wire Circuit Function
A 0.8 TN 1859 Left Rear Midrange Speaker Output (+) A 0.8 TN 1859 Left Rear Midrange Speaker Output (+)
B 0.8 WH 1959 Left Rear Midrange Speaker Output (-) B 0.8 WH 1959 Left Rear Midrange Speaker Output (-)
C 0.8 TN 1855 Right Rear Midrange Speaker Output (+) C 0.8 TN/WH 1855 Right Rear Midrange Speaker Output (+)
D 0.8 OG 1955 Right Rear Midrange Speaker Output (-) D 0.8 OG 1955 Right Rear Midrange Speaker Output (-)
E 0.8 BN 199 Left Rear Speaker Output (+) E 0.8 BN 199 Left Rear Speaker Output (+)
F 0.8 YE 116 Left Rear Speaker Output (-) F 0.8 YE 116 Left Rear Speaker Output (-)
G 0.8 D-BU 46 Right Rear Speaker Output (+) G 0.8 D-BU 46 Right Rear Speaker Output (+)
H 0.8 L-BU 115 Right Rear Speaker Output (-) H 0.8 L-BU 115 Right Rear Speaker Output (-)
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.