Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2006SUBURBAN C1500, 5.3 ZREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1937 (POWER STEERING SYSTEM)SPECIFICATIONSFASTENER TIGHTENING SPECIFICATIONS
2006 Chevrolet Suburban C1500, 5.3 Z
Fastener Tightening Specifications
2006 Chevrolet Suburban C1500, 5.3 ZSECTION Fastener Tightening Specifications
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fastener Tightening Specifications
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Electronic Power Steering Control Module Bolt | 9 N.m | 80 lb in |
| Pitman Arm Nut at the Relay Rod | 62 N.m | 46 lb ft |
| Pitman Arm Nut at the Steering Gear | 250 N.m | 184 lb ft |
| Power Brake Booster Inlet Hose Fitting | 32 N.m | 24 lb ft |
| Power Steering Assist Motor Bolt | 13 N.m | 115 lb in |
| Power Steering Fluid Cooler Bolt | 9 N.m | 80 lb in |
| Power Steering Fluid Reservoir Stud | 58 N.m | 44 lb ft |
| Power Steering Gear Inlet Hose Fitting | 32 N.m | 24 lb ft |
| Power Steering Gear Inlet Hose Retaining Plate Bolt | 12 N.m | 106 lb in |
| Power Steering Pump Bolt | 50 N.m | 37 lb ft |
| Power Steering Pump Bracket Bolt | 50 N.m | 37 lb ft |
| Power Steering Pump Fitting | 75 N.m | 55 lb ft |
| Steering Gear Bolt - Hydraulic Rack and Pinion Left Side | 220 N.m | 162 lb ft |
| Steering Gear Bolt - Hydraulic Rack and Pinion Right Side | 100 N.m | 74 lb ft |
| Steering Gear Bolt - Recirculating Ball | 150 N.m | 110 lb ft |
| Steering Gear Cylinder Pipe Fitting | 34 N.m | 25 lb ft |
| Steering Gear Pitman Shaft and Housing Cover Bolt | 62 N.m | 46 lb ft |
| Steering Gear Pitman Shaft Lash Adjuster Lock Nut | 49 N.m | 36 lb ft |
| Steering Linkage Inner Tie Rod - Electronic Power Steering | 145 N.m | 107 lb ft |
| Steering Linkage Inner Tie Rod - Hydraulic Rack and Pinion | 150 N.m | 111 lb ft |
| Steering Linkage Inner Tie Rod Nut | 75 N.m | 55 lb ft |
| Steering Linkage Outer Tie Rod Nut | 60 N.m | 44 lb ft |
| Steering Linkage Shield Bolt | 12 N.m | 111 lb in |
| Steering Shaft Coupling Bolt | 47 N.m | 45 lb ft |
| Stub Shaft Housing Bolt | 62 N.m | 46 lb ft |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.