Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2006SUBURBAN C1500, 5.3 ZREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1937 (POWER STEERING SYSTEM)COMPONENT LOCATORPOWER STEERING GEAR DISASSEMBLED VIEW (TWO MODE HYBRID)DISASSEMBLED VIEW
2006 Chevrolet Suburban C1500, 5.3 Z
Disassembled View
2006 Chevrolet Suburban C1500, 5.3 ZSECTION Disassembled View
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
| 1 | Steering Gear |
| 2 | Steering Linkage Inner Tie Rod |
| 3 | Steering Linkage Outer Tie Rod Nut |
| 4 | Steering Linkage Outer Tie Rod |
| 5 | Steering Linkage Inner Tie Rod Nut |
| 6 | Outer Steering Gear Boot Clamp |
| 7 | Steering Gear Boot |
| 8 | Inner Steering Gear Boot Clamp |
| 9 | Power Steering Assist Motor Bolt |
| 10 | Power Steering Assist Motor |
| 11 | Power Steering Assist Motor Seal |
| 12 | Power Steering Assist Motor Label |
| 13 | Power Steering Wiring Harness Extension Harness |
| 14 | Plastic Tie Strap |
| 15 | Power Steering Wiring Harness Extension Harness Retainer |
| 16 | Power Steering Wiring Harness Extension Harness Retainer |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.