Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2006SUBURBAN C1500, 5.3 ZREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1521 (FRONT DRIVE AXLE)SPECIFICATIONSFASTENER TIGHTENING SPECIFICATIONS
2006 Chevrolet Suburban C1500, 5.3 Z
Fastener Tightening Specifications
2006 Chevrolet Suburban C1500, 5.3 ZSECTION Fastener Tightening Specifications
WARNING: This page is about a different car, the 2009 GMC Sierra, 2009 GMC Cab & Chassis Sierra, 2009 Chevrolet Silverado, and 2009 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Differential Adjuster Lock Nut Bolt | 20 N.m | 15 lb ft |
| Differential Carrier Assembly Case Bolts 8.25 Axle | 73 N.m | 54 lb ft |
| Differential Carrier Assembly Case Bolts 9.25 Axle | 47 N.m | 35 lb ft |
| Differential Carrier Assembly Mounting Bolts and Nuts | 100 N.m | 75 lb ft |
| Differential Carrier Bracket to Frame Nuts | 100 N.m | 75 lb ft |
| Front Differential Carrier Shield Bolts | 20 N.m | 15 lb ft |
| Front Drive Axle Actuator | 20 N.m | 15 lb ft |
| Inner Shaft Housing to Bracket Nuts | 100 N.m | 75 lb ft |
| Inner Shaft Housing to Differential Carrier Assembly Bolts 8.25 Axle | 55 N.m | 41 lb ft |
| Inner Shaft Housing to Differential Carrier Assembly Bolts 9.25 Axle | 40 N.m | 30 lb ft |
| Pinion Shaft Lock Bolt, 9.25 Axle | 53 N.m | 39 lb ft |
| Plug, Drain and Fill | 33 N.m | 24 lb ft |
| Ring Gear Bolts, 8.25 Axle | 120 N.m | 89 lb ft |
| Ring Gear Bolts, 9.25 Axle | 138 N.m | 102 lb ft |
| Stabilizer Link Nut | 18 N.m | 13 lb ft |
| Vent Hose Connector | 28 N.m | 21 lb ft |
| Wheel Drive Shaft Inboard Flange Bolts | 79 N.m | 58 lb ft |
| Wheel Drive Shaft to Front Hub Nut | 240 N.m | 177 lb ft |
| Yoke Retainer Bolts | 25 N.m | 18 lb ft |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.