Driver Door Module (DDM) X6

2006 Chevrolet Suburban C1500, 5.3 ZSECTION Driver Door Module (DDM) X6
WARNING: This page is about a different car, the 2008 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Driver Door Module (DDM) X6 Connector End View
GM1664575Courtesy of GENERAL MOTORS CORP.
Driver Door Module (DDM) X6

Pin Wire Circuit Function
1 - - Not Used
2 0.35 BN 5881 Left Front Door Handle Switch Signal (3)
3 - - Not Used
4 0.35 D-BU 5882 Left Front Door Handle Switch Signal (2)
5-8 - - Not Used
9 0.35 WH 901 IC 2 Control (TSQ)
10-14 - - Not Used
Connector Part Information 
  • OEM: 15127038
  • Service: See Catalog
  • Description: 14-Way F (BU)
Terminal Part Information 
  • Pins: 2, 4, 9
  • Terminal/Tray: 7116-4618-02
  • Core/Insulation Crimp: P/P
  • Release Tool/Test Probe: See Terminal Repair Kit
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.