Wheel Alignment Specifications

2006 Chevrolet Suburban C1500, 5.3 ZSECTION Wheel Alignment Specifications
WARNING: This page is about a different car, the 2007 GMC Sierra and 2007 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
Wheel Alignment Specifications

Truck Line
Model
Caster L-R Cross Caster, L-R Camber Cross Camber, L-R Toe Steering Wheel Angle
IMPORTANT: Caster is relative to ground.
C/K1500
Crew/Extended Cab Std Box
w/QXR
3.40° ± 1.00° 3.55° ± 1.00° -0.15° ± 0.75° -0.10° ± 0.60° 0.00° ± 0.60° 0.10° ± 0.20° -1.0° ± 3.5°
C/K1500
Crew/Extended Cab Std Box
w/QVL, QVM, QSS, QXQ, QXN
3.55° ± 1.00° 3.45° ± 1.00° 0.10° ± 0.75° -0.10° ± 0.60° 0.00° ± 0.60° 0.10° ± 0.20° -1.0° ± 3.5°
C/K1500
Crew/Extended Cab Std Box
w/QMN, QPR, QPO, QBL, QJP, QJM, QXK
3.65° ± 1.00° 3.40° ± 1.00° 0.25° ± 0.75° -0.10° ± 0.60° 0.00° ± 0.60° 0.10° ± 0.20° -1.0° ± 3.5°
C/K1500
Standard Cab Standard Box
w/QXR, QXN, QXQ
2.75° ± 1.00° 2.65° ± 1.00° 0.10° ± 0.75° -0.10° ± 0.60° 0.00° ± 0.60° 0.10° ± 0.20° -1.0° ± 3.5°
C/K1500
Standard Cab Standard Box
w/QVL, QVM, QSS, QXK, QJP, QJM
2.85° ± 1.00° 2.60° ± 1.00° 0.25° ± 0.75° -0.10° ± 0.60° 0.00° ± 0.60° 0.10° ± 0.20° -1.0° ± 3.5°
C/K1500
Standard Cab Standard Box
w/QMN, QPR, QPQ, QBL
2.95° ± 1.00° 2.50° ± 1.00° 0.45° ± 0.75° -0.10° ± 0.60° 0.00° ± 0.60° 0.10° ± 0.20° -1.0° ± 3.5°
C/K 1500
Extended Cab Long Box
w/QXN, QVL, QVM, QXR
3.45° ± 1.00° 3.55° ± 1.00° -0.10° ± 0.75° -0.10° ± 0.60° 0.00° ± 0.60° 0.10° ± 0.20° -1.0° ± 3.5°
C/K 1500
Extended Cab Long Box
w/QJP, QJM, QBL, QXK, QSS, QXQ
3.55° ± 1.00° 3.45° ± 1.00° 0.10° ± 0.75° -0.10° ± 0.60° 0.00° ± 0.60° 0.10° ± 0.20° -1.0° ± 3.5°
C/K 1500
Extended Cab Long Box
w/QPR, QMN, QPO
3.65° ± 1.00° 3.35° ± 1.00° 0.30° ± 0.75° -0.10° ± 0.60° 0.00° ± 0.60° 0.10° ± 0.20° -1.0° ± 3.5°
C/K 1500
Standard Cab Long Box/Extended Cab Short Box
w/QXR
3.45° ± 1.00° 3.55° ± 1.00° -0.10° ± 0.75° -0.10° ± 0.60° 0.00° ± 0.60° 0.10° ± 0.20° -1.0° ± 3.5°
C/K 1500
Standard Cab Long Box/Extended Cab Short Box
w/QXQ, QSS, QVM, QXN, QVL
3.55° ± 1.00° 3.45° ± 1.00° 0.10° ± 0.75° -0.10° ± 0.60° 0.00° ± 0.60° 0.10° ± 0.20° -1.0° ± 3.5°
C/K 1500
Standard Cab Long Box/Extended Cab Short Box
w/QBL, QXK, QJP, QJM, QPR, QPQ, QMN
3.65° ± 1.00° 3.40° ± 1.00° 0.25° ± 0.75° -0.10° ± 0.60° 0.00° ±0.60° 0.10° ± 0.20° -1.0° ± 3.5°
C/K 2500
ALL
3.30° ± 1.00° 3.60° ± 1.00° -0.30° ± 0.75° 0.25° ± 0.60° 0.00° ± 0.60° 0.10° ± 0.20° -1.0° ± 3.5°
C/K 3500
ALL
3.30° ± 1.00° 3.60° ± 1.00° -0.30° ± 0.75° 0.25° ± 0.60° 0.00° ± 0.60° 0.10° ± 0.20° -1.0° ± 3.5°
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.