SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2006SSR AUTOMATICREPAIR AND DIAGNOSISRESTRAINTSAIR BAG, SRSSUPPLEMENTAL INFLATABLE RESTRAINT SYSTEMREPAIR INSTRUCTIONSINFLATABLE RESTRAINT INSTRUMENT PANEL (I/P) MODULE DISABLE SWITCH REPLACEMENTINSTALLATION PROCEDURE
2006 Chevrolet SSR Automatic

Installation Procedure

2006 Chevrolet SSR AutomaticSECTION Installation Procedure
    Fig 1: View of Inflatable Restraining Instrument Panel Module Disable Switch
    GM1332706Courtesy of GENERAL MOTORS CORP.
  1. Position the inflatable restraint instrument panel module disable switch in front of the trim panel.
  2. Connect the electrical connector to the inflatable restraint instrument panel module disable switch.
  3. Install the inflatable restraint instrument panel module disable switch into the trim panel.
    4. Fig 2: Identifying Switch to Trim Panel Tab
    GM1332721Courtesy of GENERAL MOTORS CORP.
  4. Attach the retaining tabs (1) onto the inflatable restraint instrument panel module disable switch.
  5. Install the instrument panel storage compartment door. Refer to Storage Compartment Replacement - Instrument Panel (I/P) .
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.