Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2006SSR AUTOMATICREPAIR AND DIAGNOSISENGINE MECHANICALCOOLING SYSTEM (MECHANICAL)ENGINE COOLING SYSTEMDIAGNOSTIC INFORMATION AND PROCEDURESSCAN TOOL OUTPUT CONTROLS
2006 Chevrolet SSR Automatic
Scan Tool Output Controls
2006 Chevrolet SSR AutomaticSECTION Scan Tool Output Controls
Powertrain Control Module
| Scan Tool Output Control | Additional Menu Selection(s) | Description |
|---|---|---|
| Fan Relay 1 | Fan Relays | The scan tool displays ON and OFF. This allows you to command the low speed fan relay ON and OFF. The engine does not need to be running for this to function. If engine is running, then the A/C must be in the OFF position or the OFF command will not function. |
| Fan Relay 2 | Fan Relays | The scan tool displays ON and OFF. This allows you to command the high speed fan relay ON and OFF. The engine does not need to be running for this to function. If engine is running, then the A/C must be in the OFF position or the OFF command will not function. |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.