Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2006SSR AUTOMATICREPAIR AND DIAGNOSISENGINE MECHANICALCOOLING SYSTEM (MECHANICAL)ENGINE COOLING SYSTEMDIAGNOSTIC INFORMATION AND PROCEDURESSCAN TOOL DATA LIST
2006 Chevrolet SSR Automatic
Scan Tool Data List
2006 Chevrolet SSR AutomaticSECTION Scan Tool Data List
Powertrain Control Module
| Scan Tool Parameter | Data List | Units Displayed | Typical Data Value |
|---|---|---|---|
| Ignition switch in RUN/Engine running/Automatic transmission in PARK/Manual transmission in NEUTRAL/Air conditioner is OFF | |||
| ECT | Eng 1, 2, Fuel Trim, Misfire | °C/°F | Varies |
| High Speed Fan Relay | Eng 2 | On/Off | Varies |
| Low Speed Fan Relay | Eng 2 | On/Off | Varies |
Instrument Panel Cluster
| Scan Tool Parameter | Data List | Units Displayed | Typical Data Value |
|---|---|---|---|
| Ignition switch in RUN/Engine running/Automatic transmission in PARK/Manual transmission in NEUTRAL/Air conditioner is OFF | |||
| Monitored Coolant Temp | Data 1 | °C/°F | Varies |
| Displayed Coolant Temp | Data 1 | °C/°F | Varies |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.