Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DBβ LIVE
HOMESERVICE MANUALSCHEVROLET2006SSR AUTOMATICREPAIR AND DIAGNOSISELECTRICALINSTRUMENT PANEL SYSTEM DISPLAYS, GAUGES AND CONSOLECOMPONENT LOCATORINSTRUMENT PANEL, GAGES, AND CONSOLE CONNECTORS
2006 Chevrolet SSR Automatic
Instrument Panel, Gages, and Console Connectors
2006 Chevrolet SSR AutomaticSECTION Instrument Panel, Gages, and Console Connectors
Ambient Air Temperature Sensor (ERG/ERH)
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | L-GN/BK | 735 | Ambient Air Temperature Sensor Signal |
| B | BN | 718 | Low Reference |
Auxiliary Gage (ERG/ERH)
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| 1 | PK | 639 | Ignition 1 Voltage |
| 2 | BK | 1350 | Ground |
| 3 | GY | 2289 | Class 2 Serial Data |
| 4 | BN/WH | 230 | Instrument Panel Lamps Dimming Control |
Engine Oil Pressure (EOP) Sensor
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | BK | 407 | Low Reference |
| B | GY | 705 | 5-Volt Reference |
| C | TN/WH | 332 | Oil Pressure Sensor Signal |
Fuel Pump and Sender Assembly
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| 1 | BK | 2450 | Ground |
| 2 | BK | 2759 | Low Reference |
| 3 | PU | 1589 | Fuel Level Sensor Signal |
| 4 | GY | 120 | Fuel Pump Supply Voltage |
Instrument Panel Cluster (IPC)
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A1 | L-BU | 2114 | Left Turn Signal Lamps Supply Voltage |
| A2 | OG | 2340 | Battery Positive Voltage |
| A3 | - | - | Not Used |
| A4 | BK/WH | 751 | Ground |
| A5 | BK | 2250 | Ground |
| A6 | - | - | Not Used |
| A7 | BN/WH | 230 | Instrument Panel Lamps Dimming Control |
| A8 | YE | 1327 | DIC Fuel Signal |
| A9 | D-GN/WH | 1358 | DIC Switch Signal |
| A10 | D-BU | 894 | DIC Toggle Switch Signal |
| A11 | OG | 1816 | DIC Set/Reset Switch Signal |
| A12 | WH | 121 | Engine Speed Signal |
| B1 | GY | 1036 | IPC Class 2 Serial Data |
| B2-B3 | - | - | Not Used |
| B4 | BN/WH | 419 | MIL Control |
| B5-B6 | - | - | Not Used |
| B7 | PK | 639 | Ignition 1 Voltage |
| B8 | - | - | Not Used |
| B9 | WH | 817 | Vehicle Speed Signal |
| B10 | D-BU | 2115 | Right Turn Signal Lamps Supply Voltage |
| B11-B12 | - | - | Not Used |
Steering Wheel Controls - Left
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| 1 | YE | 1327 | DIC Fuel Signal |
| 2 | OG | 1816 | DIC Set/Reset Switch Signal |
| 3 | BK | 230 | Instrument Panel Lamps Dimming Control |
| 4 | BK | 2250 | Ground |
| 5 | D-GN/WH | 1358 | DIC Switch Signal |
| 6 | D-BU | 894 | DIC Toggle Switch Signal |
| 7 | - | - | Not Used |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- β’ You smell fuel, burning insulation, or see smoke.
- β’ Brakes feel soft, pull hard to one side, or make grinding noises.
- β’ The engine overheats, stalls repeatedly, or misfires under load.
- β’ You are missing required tools, torque specs, or safe lifting equipment.
- β’ You are not confident in the next step or safety outcome.