Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

SYS.OK|MANUAL.DB● LIVE

HOMESERVICE MANUALSCHEVROLET2006SSR AUTOMATICREPAIR AND DIAGNOSISBODY & FRAMEWINDOWSDOOR SYSTEM, MIRROR SYSTEM & WINDOW SYSTEMREPAIR INSTRUCTIONSWINDOW REPLACEMENT - DOORREMOVAL PROCEDURE

2006 Chevrolet SSR Automatic

Removal Procedure

2006 Chevrolet SSR AutomaticSECTION Removal Procedure

Remove the door trim panel. Refer to Trim Panel Replacement - Door .

Fig 1: View Of Inner Door Panel Protector

GM1275116

Courtesy of GENERAL MOTORS CORP.

Remove the front door water deflector. Refer to Water Deflector Replacement - Front Door .

Fig 2: View of Window to Window Regulator Bolts

GM1325791

Courtesy of GENERAL MOTORS CORP.

Reposition the window half way down to access the window clamp bolts.

Fig 3: View of Window Clamp Bolts

GM1325790

Courtesy of GENERAL MOTORS CORP.

Remove the window clamp bolts.

Fig 4: View of Door Window

GM1325782

Courtesy of GENERAL MOTORS CORP.

Remove the door window through the top opening of the door.

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready Tools Free Quote Check Quote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.
• Brakes feel soft, pull hard to one side, or make grinding noises.
• The engine overheats, stalls repeatedly, or misfires under load.
• You are missing required tools, torque specs, or safe lifting equipment.
• You are not confident in the next step or safety outcome.