SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2006SSR AUTOMATICREPAIR AND DIAGNOSISBODY & FRAMEWINDOWSDOOR SYSTEM, MIRROR SYSTEM & WINDOW SYSTEMREPAIR INSTRUCTIONSMIRROR REPLACEMENT - POWERREMOVAL PROCEDURE
2006 Chevrolet SSR Automatic

Removal Procedure

2006 Chevrolet SSR AutomaticSECTION Removal Procedure
CAUTION: Refer to Express Down Feature Caution in Cautions and Notices.
  1. Remove the door trim panel. Refer to Trim Panel Replacement - Door .
    2. Fig 1: View Of Inner Door Panel Protector
    GM1275116Courtesy of GENERAL MOTORS CORP.
  2. Remove the front door water deflector. Refer to Water Deflector Replacement - Front Door .
    3. Fig 2: Raised Window
    GM1325789Courtesy of GENERAL MOTORS CORP.
  3. Raise the window.
    4. Fig 3: View of Mirror Harness Retainers
    GM956003Courtesy of GENERAL MOTORS CORP.
  4. Disconnect the electrical connector(s).
  5. Disconnect the mirror harness from the retainers.
  6. Lower the window.
  7. Remove the nuts from the power mirror studs.
  8. Remove the power mirror with the harness and gasket.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.