SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2006SSR AUTOMATICREPAIR AND DIAGNOSISBODY & FRAMEWINDOWSDOOR SYSTEM, MIRROR SYSTEM & WINDOW SYSTEMREPAIR INSTRUCTIONSHINGE REPLACEMENT - DOORREMOVAL PROCEDURE
2006 Chevrolet SSR Automatic

Removal Procedure

2006 Chevrolet SSR AutomaticSECTION Removal Procedure
    IMPORTANT: In order to minimize door realignment, do not remove both hinges at the same time. Replace the broken door hinge first.
  1. Remove the tire and wheel. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.
  2. Remove the front wheelhouse liner. Refer to Wheelhouse Liner Replacement - Front in Body Front End.
  3. Remove the front fender. Refer to Fender Replacement - Front in Body Front End.
    4. Fig 1: View of Door Hinge
    GM63821Courtesy of GENERAL MOTORS CORP.
  4. Mark the location of the door hinge on the door and on the hinge pillar.
  5. Support the door.
    6. Fig 2: View Of Hinge Bolt Mounting Locations
    GM63776Courtesy of GENERAL MOTORS CORP.
  6. Remove the bolts securing the door hinge to the hinge pillar.
    7. Fig 3: View of Upper Door Hinge to Door Bolts
    GM63779Courtesy of GENERAL MOTORS CORP.
  7. Remove the bolts securing the door hinge to the door.
  8. Remove the door hinge.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.