SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2006SSR AUTOMATICREPAIR AND DIAGNOSISBODY & FRAMEWINDOWSDOOR SYSTEM, MIRROR SYSTEM & WINDOW SYSTEMREPAIR INSTRUCTIONSDOOR CHECK LINK REPLACEMENTREMOVAL PROCEDURE
2006 Chevrolet SSR Automatic

Removal Procedure

2006 Chevrolet SSR AutomaticSECTION Removal Procedure
  1. Remove the side front door trim panel. Refer to Trim Panel Replacement - Door .
  2. Remove the front water deflector. Refer to Water Deflector Replacement - Front Door .
    3. Fig 1: View of Check Link to Pillar Fastener
    GM1275563Courtesy of GENERAL MOTORS CORP.
  3. Remove the fastener that retains the door check link to the pillar.
    4. Fig 2: View of Rubber Dust Boot
    GM1275560Courtesy of GENERAL MOTORS CORP.
  4. Remove the rubber dust boot from the door check link in order to gain access to the door retaining fasteners.
    5. Fig 3: View of Door Check Link Retaining Fasteners
    GM1275564Courtesy of GENERAL MOTORS CORP.
  5. Remove the door check link retaining fasteners from the door.
  6. Remove the door check link assembly through the door access hole.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.