Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

SYS.OK|MANUAL.DB● LIVE

HOMESERVICE MANUALSCHEVROLET2006SSR AUTOMATICREPAIR AND DIAGNOSISACCESSORIES & EQUIPMENTINFOTAINMENTENTERTAINMENT SYSTEMSREPAIR INSTRUCTIONSSPEAKER REPLACEMENT - FRONT UPPERINSTALLATION PROCEDURE

2006 Chevrolet SSR Automatic

Installation Procedure

2006 Chevrolet SSR AutomaticSECTION Installation Procedure

Fig 1: Identifying Speaker to Door Fasteners - Front Upper

GM1344639

Courtesy of GENERAL MOTORS CORP.

Position the speaker onto the door.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the fasteners securing the speaker to the door (1).
Tighten: Tighten the fasteners to 2 N.m (18 lb in).

Fig 2: Identifying Electrical Connector

GM1344640

Courtesy of GENERAL MOTORS CORP.

Connect the electrical connector.

Fig 3: View of CPA for the Connector

GM1344641

Courtesy of GENERAL MOTORS CORP.

Install the CPA for the connector.
Install the door trim panel. Refer to Trim Panel Replacement - Door in Doors.

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready Tools Free Quote Check Quote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.
• Brakes feel soft, pull hard to one side, or make grinding noises.
• The engine overheats, stalls repeatedly, or misfires under load.
• You are missing required tools, torque specs, or safe lifting equipment.
• You are not confident in the next step or safety outcome.