Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2006SSR AUTOMATICREPAIR AND DIAGNOSISACCESSORIES & EQUIPMENTINFOTAINMENTENTERTAINMENT SYSTEMSDIAGNOSTIC INFORMATION AND PROCEDURESSCAN TOOL DATA LIST
2006 Chevrolet SSR Automatic
Scan Tool Data List
2006 Chevrolet SSR AutomaticSECTION Scan Tool Data List
Radio
| Scan Tool Parameter | Data List | Units Displayed | Typical Data Value |
|---|---|---|---|
| Operating Conditions: Ignition ON/Engine OFF/Radio ON | |||
| 8 Digit GM Part Number | ID Information | Numeric | Varies |
| Balance | Data | Numeric | Varies |
| Bass | Data | % | Varies |
| Battery Voltage | Data | Volts | Varies |
| Cal. Module 1 Part No. | ID Information | Numeric | Varies |
| Cal. Module 1 Suffix | ID Information | Alpha | Varies |
| Fade | Data | Numeric | Varies |
| Ign Since Current DTC | Data | Cycles | Varies |
| Midrange | Data | % | Varies |
| Operational S/W Part No. | ID Information | Numeric | Varies |
| Operational S/W Suffix | ID Information | Alpha | Varies |
| Signal Strength | Data | dB | Varies |
| Treble | Data | % | Varies |
| Volume | Data | % | Varies |
Amplifier
| Scan Tool Parameter | Data List | Units Displayed | Typical Data Value |
|---|---|---|---|
| Operating Conditions: Ignition ON/Engine OFF/Radio ON | |||
| 8 Digit GM Part Number | ID Information | Numeric | Varies |
| Balance | Data | Numeric | Varies |
| Bass | Data | % | Varies |
| Battery Voltage | Data | Volts | Varies |
| Chime Volume | Data | Percent | 0-100% |
| Fade | Data | Numeric | Varies |
| Ign Since Current DTC | Data | Cycles | Varies |
| Treble | Data | % | Varies |
| Volume | Data | % | Varies |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.