SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2006SSR AUTOMATICREPAIR AND DIAGNOSIS (SINGLE PAGE)ENGINE MECHANICALCOOLING SYSTEM (MECHANICAL)ENGINE COOLING SYSTEMSPECIFICATIONSFASTENER TIGHTENING SPECIFICATIONS
2006 Chevrolet SSR Automatic

Fastener Tightening Specifications

2006 Chevrolet SSR AutomaticSECTION Fastener Tightening Specifications
Fastener Tightening Specifications

Application Specification
Metric English
Air Cleaner Outlet Duct Clamp Screw 7 N.m 62 lb in
Coolant Air Bleed Pipe Stud/Bolt 12 N.m 106 lb in
Coolant Heater Cord Bolt 8 N.m 71 lb in
Coolant Heater 50 N.m 37 lb ft
Engine Block Coolant Drain Plug 60 N.m 44 lb ft
Fan Clutch Bolt 23 N.m 17 lb ft
Fan Clutch Nut 56 N.m 41 lb ft
Fan Shroud Bolt 9 N.m 80 lb in
Radiator Bolt 25 N.m 18 lb ft
Surge Tank Bolt/Nut 9 N.m 80 lb in
Thermostat Housing Bolt 15 N.m 11 lb ft
Transmission Control Module (TCM) Cover Bolt 9 N.m 80 lb in
Transmission Control Module (TCM) Electrical Connector Bolt 8 N.m 71 lb in
Water Pump Bolt (First Pass) 15 N.m 11 lb ft
Water Pump Bolt (Final Pass) 30 N.m 22 lb ft
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.