Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Scan Tool Data List
2006 Chevrolet SSR AutomaticSECTION Scan Tool Data List
Body Control Module (BCM)
| Scan Tool Parameter | Data List | Units Displayed | Typical Data Value |
|---|---|---|---|
| Ignition ON/Engine Running | |||
| Battery Voltage | Data | Volts | 13.9 Volts |
Engine Control Module (ECM)
| Scan Tool Parameter | Data List | Units Displayed | Typical Data Value |
|---|---|---|---|
| Ignition ON/Engine OFF | |||
| Crank Request Signal | Electrical/Theft Data | Yes/No | No |
| GEN F-Terminal Signal | Electrical/Theft Data | % | 0% |
| GEN L-Terminal Signal Command | Electrical/Theft Data | On/OFF | OFF |
| Ignition 1 Signal | Engine Electrical | Volts | Varies |
| PNP Switch | Engine Electrical | Park / Neutral / In Gear | Park |
| Starter Relay Command | Engine Electrical | On/Off | Off |
| Starter Relay Circuit Status | Engine Electrical | Incomplete / Short Gnd / Open / Short to B+ / OK | OK |
| TR. Sw. | Transmission Data | Park / Reverse / Neutral / Drive 5 / Drive 4 / Drive 3 / Drive 2 / Drive 1 | Park |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.