Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Scan Tool Output Controls
2006 Chevrolet SSR AutomaticSECTION Scan Tool Output Controls
Body Control Module
| Scan Tool Output Control | Additional Menu Selection(s) | Description |
|---|---|---|
| Miscellaneous Test | Door Lock/Unlock | The body control module (BCM) actuates the door lock relay when you select Lock. All doors should lock. |
| Miscellaneous Test | Door Lock/Unlock | The BCM actuates the door unlock relay and the driver door unlock relay when you select Unlock. All doors should unlock. |
Roof Door Module
| Scan Tool Output Control | Additional Menu Selections | Description |
|---|---|---|
| Driver Window | Up/Down | The driver window will travel to the full up position when you select Up and will travel to the full down position when you select Down |
| Passenger Window | Up/Down | The passenger window will travel to the full up position when you select Up and will travel to the full down position when you select Down |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.