SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2006SSR AUTOMATICREPAIR AND DIAGNOSIS (SINGLE PAGE)BODY & FRAMESEATSSEAT SYSTEMSPECIFICATIONSFASTENER TIGHTENING SPECIFICATIONS
2006 Chevrolet SSR Automatic

Fastener Tightening Specifications

2006 Chevrolet SSR AutomaticSECTION Fastener Tightening Specifications
Fastener Tightening Specifications

Application Specification
Metric English
Front Finish Panel Screw 1.5 N.m 13 lb in
Front Seat Mounting Bolt 45 N.m 33 lb ft
Front Seat Mounting Nut 45 N.m 33 lb ft
Seat Back Cushion Side Bolster Panel Screw 6.25 N.m 55 lb in
Seat Back Panel Screw 6.25 N.m 55 lb in
Seat Back Recliner Handle Screw 1.5 N.m 13 lb ft
Seat Back Release Knob Screw 1.5 N.m 13 lb in
Seat Belt Buckle Bolt 55 N.m 41 lb ft
Seat Belt Guide Nuts 11.0 N.m 8 lb ft
Seat Cushion Frame Mounting Nut 24 N.m 18 lb ft
Seat Cushion Outer Trim Panel Screw 1.5 N.m 13 lb in
Seat Memory Control Module Screw 1.5 N.m 13 lb in
Seat Recliner Mounting Bolt 26 N.m 19 lb ft
Seat Switch Bezel Screw 1.5 N.m 13 lb in
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.