SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2006SSR AUTOMATICREPAIR AND DIAGNOSIS (SINGLE PAGE)BODY & FRAMEMIRRORSDOOR SYSTEM, MIRROR SYSTEM & WINDOW SYSTEMREPAIR INSTRUCTIONSSWITCH REPLACEMENT - SIDE WINDOW AND MULTI-FUNCTIONREMOVAL PROCEDURE
2006 Chevrolet SSR Automatic

Removal Procedure

2006 Chevrolet SSR AutomaticSECTION Removal Procedure
  1. Remove the console shift lever bezel from the console. Refer to Console Shift Lever Bezel Replacement in Instrument Panel, Gages and Console.
    2. Fig 1: Identifying Console Shift Bezel Fasteners
    GM1166670Courtesy of GENERAL MOTORS CORP.
  2. Remove the fasteners from the console shift bezel.
    3. Fig 2: View of Console Shift Bezel
    GM1166669Courtesy of GENERAL MOTORS CORP.
  3. Remove the console shift bezel.
    4. Fig 3: View of Shift Bezel Switch Membrane
    GM1166850Courtesy of GENERAL MOTORS CORP.
  4. Remove the shift bezel switch membrane.
    5. Fig 4: Identifying Shift Bezel Switch Assembly Screws
    GM1166800Courtesy of GENERAL MOTORS CORP.
  5. Remove the shift bezel switch assembly screws.
    6. Fig 5: View of Shift Bezel Switch Assembly
    GM1166673Courtesy of GENERAL MOTORS CORP.
  6. Remove the shift bezel switch assembly.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.