SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2006CORVETTE BASE, 2D CONVERTIBLE, AUTOMATICREPAIR AND DIAGNOSISBRAKESMECHANICAL - HYDRAULICDISC BRAKE SYSTEMSPECIFICATIONSDISC BRAKE COMPONENT SPECIFICATIONS
2006 Chevrolet Corvette Base, 2D Convertible, Automatic

Disc Brake Component Specifications

2006 Chevrolet Corvette Base, 2D Convertible, AutomaticSECTION Disc Brake Component Specifications
Disc Brake Component Specifications

Application Specification
Metric English
Front Brakes
  • Rotor Discard Thickness
 30.3 mm 1.19 in
  • Rotor Maximum Allowable Assembled Lateral Runout
 0.06 mm 0.002 in
  • Rotor Maximum Allowable Scoring
 1.50 mm 0.059 in
  • Rotor Maximum Allowable Thickness Variation
 0.025 mm 0.001 in
  • Rotor Minimum Allowable Thickness After Refinish
 30.6 mm 1.205 in
  • Rotor Thickness - New
 32 mm 1.26 in
Rear Brakes
  • Rotor Discard Thickness
 24.5 mm 0.965 in
  • Rotor Maximum Allowable Assembled Lateral Runout
 0.06 mm 0.002 in
  • Rotor Maximum Allowable Scoring
 1.50 mm 0.059 in
  • Rotor Maximum Allowable Thickness Variation
 0.025 mm 0.001 in
  • Rotor Minimum Allowable Thickness After Refinish
 24.9 mm 0.980 in
  • Rotor Thickness - New
 26 mm 1.02 in
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.