Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2006COBALT SS, 4D SEDAN, STANDARDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 801 (FIXED AND MOVEABLE WINDOWS SYSTEM)DESCRIPTION AND OPERATIONPOWER WINDOWS DESCRIPTION AND OPERATIONPOWER WINDOWS SYSTEM COMPONENTS
2006 Chevrolet Cobalt SS, 4D Sedan, Standard
Power Windows System Components
2006 Chevrolet Cobalt SS, 4D Sedan, StandardSECTION Power Windows System Components
WARNING: This page is about a different car, the 2010 Pontiac G5 and 2010 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
The power window system consists of the following components:
- Driver power window switch - Controls the up and down operation of all power windows
- Front passenger power window switch - Controls the up and down operation of the front passenger power window
- LR power window switch - Controls the up and down operation of the LR power window
- RR power window switch - Controls the up and down operation of the RR power window
- Window lockout switch - Part of the driver power window switch and enables or disables rear power window operation from the rear window switches
- Power window motors in each of the doors
- PWR WINDOWS 30A fuse - Located in the body control module (BCM) fuse panel and provides power window system power when the ignition is in ACC or RUN or when in retained accessory power (RAP) mode
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.