Fuse Block - I/P Right Label

2006 Chevrolet Cobalt SS, 4D Sedan, StandardSECTION Fuse Block - I/P Right Label
WARNING: This page is about a different car, the 2005 Saturn L300. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Right I/P Fuse Block Label
GM1223031Courtesy of GENERAL MOTORS CORP.
Fuse Block - I/P Right Label Usage

Device Rating Description
BODY Fuse 10A Door Lock Switch - Driver, Door Lock Switch - Front Passenger, EVAP Canister Vent Solenoid, and Fuse Block - I/P Right MIRROR Relay
DR UNLOCK Relay - Door Lock Actuator - Driver
FOG LAMP Fuse 10A FOG LAMP Relay (Not Used)
FOG LAMP Relay - Not Used
HTD SEAT Fuse 20A Driver Seat and Front Passenger Seat (Not Used)
LOCKS Fuse 15A Fuse Block - I/P Right DOOR LOCK, DOOR UNLOCK, and DRIVER DOOR UNLOCK Relays
LOCK Relay - Door Lock Actuator - Driver, Door Lock Actuator - Front Passenger, Door Lock Actuator - LR, and Door Lock Actuator - RR
MIRROR Relay - Outside Rearview Mirror - Driver and Outside Rearview Mirror - Front Passenger
PREM AMP Fuse 15A Audio Amplifier
POWER SEAT Fuse 20A Seat Adjuster Switch - Driver
RR WIPER/SUNROOF Fuse 20A Sunroof Module and Fuse Block - Underhood REAR WIPER Relay
UNLOCK Relay - Door Lock Actuator - Driver, Door Lock Actuator - Front Passenger, Door Lock Actuator - LR, and Door Lock Actuator - RR
WINDOW Relay - Window Switch - Driver and Window Switch - Front Passenger
- - FUSE PULLER
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.