Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

SYS.OK|MANUAL.DB● LIVE

HOMESERVICE MANUALSCHEVROLET2006COBALT SS, 4D SEDAN, STANDARDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 780 (NAVIGATION SYSTEM)HFL-NAVIGATION MICROPHONE REMOVAL/INSTALLATION

2006 Chevrolet Cobalt SS, 4D Sedan, Standard

HFL-Navigation Microphone Removal/Installation

2006 Chevrolet Cobalt SS, 4D Sedan, StandardSECTION HFL-Navigation Microphone Removal/Installation

WARNING: This page is about a different car, the 2011 Honda Insight and 2010 Honda Insight. However, it is still accessible from the selected car via links, so may be relevant.

Remove the front individual map light (see INDIVIDUAL MAP LIGHT TEST/REPLACEMENT ).

Fig 1: HFL-Navigation Microphone And Nuts With Torque Specifications
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Carefully pry off the microphone (A) from the map light housing (B) while pressing the retaining tabs (C).
Install the HFL-navigation microphone in the reverse order of removal.

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready Tools Free Quote Check Quote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.
• Brakes feel soft, pull hard to one side, or make grinding noises.
• The engine overheats, stalls repeatedly, or misfires under load.
• You are missing required tools, torque specs, or safe lifting equipment.
• You are not confident in the next step or safety outcome.