Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2006COBALT SS, 4D SEDAN, STANDARDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 73 (DOOR SYSTEM, MIRROR SYSTEM & WINDOW SYSTEM)SPECIFICATIONSFASTENER TIGHTENING SPECIFICATIONS
2006 Chevrolet Cobalt SS, 4D Sedan, Standard
Fastener Tightening Specifications
2006 Chevrolet Cobalt SS, 4D Sedan, StandardSECTION Fastener Tightening Specifications
WARNING: This page is about a different car, the 2005 Buick LaCrosse and 2005 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
Fastener Tightening Specifications
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Front Door Body Side Hinge Bolts | 33 N.m | 24 lb ft |
| Front Door Inside Door Handle Screw | 3 N.m | 27 lb in |
| Front Door Lock Screws | 10 N.m | 89 lb in |
| Front Door Lock Striker Screws | 20 N.m | 15 lb ft |
| Front Door Outer Belt Sealing Strip Screws | 2 N.m | 18 lb in |
| Front Door Side Hinge Bolts | 33 N.m | 24 lb ft |
| Front Door Window Channel Retaining Screws | 2 N.m | 18 lb in |
| Lower Door Hinge Side Bolts | 33 N.m | 24 lb ft |
| Outside Door Handle Bolts | 10 N.m | 89 lb in |
| Outside Rearview Mirror Motor Screws | 2 N.m | 18 lb in |
| Outside Rearview Mirror Nuts | 6 N.m | 54 lb in |
| Pull Cup/Trim Plate Bezel Screws | 3 N.m | 27 lb in |
| Pull Handle Trim Retaining Screw | 3 N.m | 27 lb in |
| Rear Door Body Side Hinge Bolts | 33 N.m | 24 lb ft |
| Rear Door Lock Screws | 10 N.m | 89 lb in |
| Rear Door Lock Striker Screw | 20 N.m | 15 lb ft |
| Rear Door Outer Belt Sealing Strip Screws | 2 N.m | 18 lb in |
| Rear Door Side Hinge Bolts | 33 N.m | 24 lb ft |
| Window Regulator Bolts | 10 N.m | 89 lb in |
| Window Regulator Motor Bolts | 6 N.m | 53 lb in |
| Upper Door Hinge Keeper Bolt | 33 N.m | 24 lb ft |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.