Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2006COBALT SS, 4D SEDAN, STANDARDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 679 (MANUAL TRANSMISSION - GETRAG 5 SPEED)SPECIFICATIONSSHIM SIZE SPECIFICATIONS
2006 Chevrolet Cobalt SS, 4D Sedan, Standard
Shim Size Specifications
2006 Chevrolet Cobalt SS, 4D Sedan, StandardSECTION Shim Size Specifications
WARNING: This page is about a different car, the 2008 Pontiac G5 and 2008 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
| Shim Thickness | |
|---|---|
| Metric | English |
| 0.5 mm | 0.0197 in |
| 0.55 mm | 0.0217 in |
| 0.6 mm | 0.0236 in |
| 0.65 mm | 0.0256 in |
| 0.7 mm | 0.0276 in |
| 0.75 mm | 0.0295 in |
| 0.8 mm | 0.0315 in |
| 0.85 mm | 0.0335 in |
| 0.9 mm | 0.0354 in |
| 0.95 mm | 0.0374 in |
| 1.00 mm | 0.0394 in |
| 1.05 mm | 0.0413 in |
| 1.1 mm | 0.0433 in |
| 1.15 mm | 0.0453 in |
| 1.2 mm | 0.0473 in |
| 1.25 mm | 0.0493 in |
| 1.3 mm | 0.0512 in |
| 1.35 mm | 0.0531 in |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.