Heated Seat Module - Driver (KA1)

2006 Chevrolet Cobalt SS, 4D Sedan, StandardSECTION Heated Seat Module - Driver (KA1)
WARNING: This page is about a different car, the 2008 Pontiac G5 and 2008 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Heated Seat Module - Driver (KA1) Connector End View
GM813070Courtesy of GENERAL MOTORS CORP.
Heated Seat Module - Driver (KA1)

Pin Wire Circuit Function
1-2 - - Not Used
3 0.5 PK 1501 Driver Heated Seat High/Low Signal
4 1 BK 1250 Ground
5 1 RD/WH 340 Battery Positive Voltage
6 0.8 GY 2080 Driver Heated Seat Cushion Temperature Sensor Low Reference
7 0.8 OG 2077 Heated Seat Cushion Element Supply Voltage
8 0.5 L-BU 1462 Heated Seat Switch Signal
Connector Part Information 
  • OEM: 15-97-5081
  • Service: 89046731
  • Description: 8-Way M (BK)
Terminal Part Information 
  • Terminal/Tray: See Terminal Repair Kit
  • Core/Insulation Crimp: See Terminal Repair Kit
  • Release Tool/Test Probe: See Terminal Repair Kit
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.