Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2006COBALT SS, 4D SEDAN, STANDARDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 668 (WIRING SYSTEMS AND POWER MANAGEMENT - COMPONENT VIEWS & COMPONENT CONNECTOR END VIEWS)COMPONENT CONNECTOR END VIEWSELECTRONIC BRAKE CONTROL MODULE (EBCM) (JL4/JL9)
2006 Chevrolet Cobalt SS, 4D Sedan, Standard
Electronic Brake Control Module (EBCM) (JL4/JL9)
2006 Chevrolet Cobalt SS, 4D Sedan, StandardSECTION Electronic Brake Control Module (EBCM) (JL4/JL9)
WARNING: This page is about a different car, the 2008 Pontiac G5 and 2008 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
Electronic Brake Control Module (EBCM) (JL4/JL9)
| Pin | Wire | Circuit | Function |
|---|---|---|---|
| 1 | 3 RD/BK | 542 | Battery Positive Voltage |
| 2-4 | - | - | Not Used |
| 5 | 0.5 GY | 1056 | Steering Wheel Position Sensor 5V Reference Voltage |
| 6-7 | - | - | Not Used |
| 8 | 0.5 PK | 1439 | Ignition 1 Voltage |
| 9-10 | - | - | Not Used |
| 11 | 0.5 TN/BK | 2500 | High Speed GMLAN Serial Data Bus+ |
| 12 | 0.5 TN/BK | 2500 | High Speed GMLAN Serial Data Bus+ |
| 13 | 0.5 TN | 2501 | High Speed GMLAN Serial Data Bus- |
| 14 | 0.5 TN | 2501 | High Speed GMLAN Serial Data Bus- |
| 15 | - | - | Not Used |
| 16 | 3 BK | 350 | Ground |
| 17 | - | - | Not Used |
| 18 | 0.5 PK/BK | 6434 | CAN Bus High Serial Data |
| 19 | 0.5 GY/BK | 6435 | CAN Bus Low Serial Data |
| 20-21 | - | - | Not Used |
| 22 | 0.5 D-GN | 2087 | 12V Reference |
| 23-25 | - | - | Not Used |
| 26 | 0.5 L-GN | 6257 | 5-Volt Reference (JL4 with LNF) |
| 27 | 0.5 L-GN/BK | 6258 | Low Reference (JL4 with LNF) |
| 28 | - | - | Not Used |
| 29 | 0.5 L-BU | 2088 | Steering Wheel Position Sensor Low Reference |
| 30-31 | - | - | Not Used |
| 32 | 2 RD/WH | 740 | Battery Positive Voltage |
| 33 | 0.5 TN | 833 | Right Front Wheel Speed Sensor Low Reference |
| 34 | 0.5 D-GN | 872 | Right Front Wheel Speed Sensor Signal |
| 35 | - | - | Not Used |
| 36 | 0.5 TN | 884 | Left Rear Wheel Speed Sensor Signal |
| 37 | 0.5 OG | 885 | Left Rear Wheel Speed Sensor Low Reference |
| 38-39 | - | - | Not Used |
| 40 | 0.5 OG/BK | 556 | Steering Wheel Position Sensor Low Reference |
| 41 | 0.5 D-BU | 1809 | Brake Booster Vacuum Sensor Signal (LNF) |
| 42 | 0.5 WH | 883 | Right Rear Wheel Speed Sensor Low Reference |
| 43 | 0.5 BN | 882 | Right Rear Wheel Speed Sensor Signal |
| 44 | - | - | Not Used |
| 45 | 0.5 L-BU | 830 | Left Front Wheel Speed Sensor Signal |
| 46 | 0.5 YE | 873 | Left Front Wheel Speed Sensor Low Reference |
| 47 | - | - | Not Used |
Connector Part Information
|
Terminal Part Information
|
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.