SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2006COBALT SS, 4D SEDAN, STANDARDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 668 (WIRING SYSTEMS AND POWER MANAGEMENT - COMPONENT VIEWS & COMPONENT CONNECTOR END VIEWS)COMPONENT CONNECTOR END VIEWSBRAKE PEDAL POSITION SENSOR
2006 Chevrolet Cobalt SS, 4D Sedan, Standard

Brake Pedal Position Sensor

2006 Chevrolet Cobalt SS, 4D Sedan, StandardSECTION Brake Pedal Position Sensor
WARNING: This page is about a different car, the 2008 Pontiac G5 and 2008 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Brake Pedal Position Sensor Connector End View
GM1243663Courtesy of GENERAL MOTORS CORP.
Brake Pedal Position Sensor

Pin Wire Circuit Function
A 0.35 WH 5359 5-Volt Reference
B 0.35 YE 5361 Brake Pedal Position Sensor Signal
C 0.35 BN 5360 Low Reference
Connector Part Information 
  • OEM: 15332132
  • Service: See Catalog
  • Description: 3-Way F GT 150 Series (BK)
Terminal Part Information 
  • Terminal/Tray: See Terminal Repair Kit
  • Core/Insulation Crimp: See Terminal Repair Kit
  • Release Tool/Test Probe: See Terminal Repair Kit
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.