Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2006COBALT SS, 4D SEDAN, STANDARDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 652 (HEATING, VENTILATION, AND AIR CONDITIONING)SPECIFICATIONSREFRIGERANT SYSTEM CAPACITIES
2006 Chevrolet Cobalt SS, 4D Sedan, Standard
Refrigerant System Capacities
2006 Chevrolet Cobalt SS, 4D Sedan, StandardSECTION Refrigerant System Capacities
WARNING: This page is about a different car, the 2008 Pontiac G5 and 2008 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
Refrigerant System Capacities
| Application | Specification | |
|---|---|---|
| Metric | English | |
| PAG Oil GM P/N 12378526 for United States PAG Oil GM P/N 88900060 for Canada |
||
| Abrupt Refrigerant Loss | 60 ml1 | 2.0 oz.1 |
| Compressor Replacement | 74 ml2 | 2.5 oz.2 |
| Condenser Replacement | 22 ml2 | 0.75 oz.2 |
| Evaporator Replacement | 22 ml2 | 0.75 oz.2 |
|
120 ml | 4.00 oz. |
| R-134a | ||
|
0.41 kg | 0.9 lb |
| 1
Abrupt refrigerant loss due to large leak, hose rupture, collision, or pressure relief valve opening. Conditions that allow the refrigerant to seep or bleed off over time do not cause this oil loss. Upon replacement of a component that caused a large refrigerant loss, also add the required amount of oil for the particular component. 2 If more than the specified amount of PAG oil was drained from a component, add the equal amount of oil drained. |
||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.