Scan Tool Data Definitions

2006 Chevrolet Cobalt SS, 4D Sedan, StandardSECTION Scan Tool Data Definitions
WARNING: This page is about a different car, the 2007 Chevrolet Monte Carlo and 2007 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.
CTD Status

The scan tool displays the current arming status of the content theft system.

Current CTD Trigger

The scan tool displays the current input which has cause a content theft alarm.

Door Key Cyl. Unlock Switch

The scan tool displays the current status of the door key cylinder unlock switch.

Driver Door Ajar Sw.

The scan tool displays the current status of the driver door ajar switch.

Driver Identification

The scan tool displays the driver which has disarmed the content theft system.

Left Rear Door Ajar Switch

The scan tool displays the current status of the left rear door ajar switch.

Hood Closed Switch

The scan tool displays the status of the hood closed portion of the hood ajar switch.

Hood Open Switch

The scan tool displays the status of the hood open portion of the hood ajar switch.

Passenger Door Ajar Sw.

The scan tool displays the current status of the passenger door ajar switch.

Right Rear Door Ajar Switch

The scan tool displays the current status of the right rear door ajar switch.

Theft LED

The scan tool displays the current status of the theft indicator as controlled by the CTD system.

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.