SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2006COBALT SS, 4D SEDAN, STANDARDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 492 (LIGHTING SYSTEMS)REPAIR INSTRUCTIONSFRONT FOG LAMP BULB REPLACEMENT
2006 Chevrolet Cobalt SS, 4D Sedan, Standard

Front Fog Lamp Bulb Replacement

2006 Chevrolet Cobalt SS, 4D Sedan, StandardSECTION Front Fog Lamp Bulb Replacement
WARNING: This page is about a different car, the 2007 Chevrolet Monte Carlo and 2007 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Fog Lamp Components
GM1576126Courtesy of GENERAL MOTORS CORP.
Front Fog Lamp Bulb Replacement

Callout Component Name

Preliminary Procedures

  1. Remove either the LF or RF headlamp assembly. Refer to Headlamp Replacement (Impala) .
  2. Disconnect the fog lamp electrical connector.
1 Bulb, Front Fog Lamp Projector
CAUTION: Refer to Halogen Bulb Caution .

Tip:  Twist the bulb socket counterclockwise to remove from the lamp housing.
2 Housing, Front Fog Lamp Projector
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.