SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2006COBALT SS, 4D SEDAN, STANDARDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 486 (FIXED & MOVEABLE WINDOW SYSTEMS)COMPONENT LOCATORWINDOW SYSTEMS CONNECTORSWINDOW SWITCH - LR (SEDAN)
2006 Chevrolet Cobalt SS, 4D Sedan, Standard

Window Switch - LR (Sedan)

2006 Chevrolet Cobalt SS, 4D Sedan, StandardSECTION Window Switch - LR (Sedan)
WARNING: This page is about a different car, the 2007 Chevrolet Monte Carlo and 2007 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Window Switch - LR (Sedan) Connector End Views
GM62469Courtesy of GENERAL MOTORS CORP.
Window Switch - LR (Sedan) Connector Pars Information

Connector Part Information 
  • OEM: 12064998
  • Service: 15306189
  • Description: 8-Way F Metri-Pack 280 Series (BK)
Terminal Part Information 
  • Terminal/Tray: 12015858/4
  • Core/Insulation Crimp: F/G
  • Release Tool/Test Probe: 12094430/J-35616-4A (PU)
Window Switch - LR (Sedan) Connector Terminal Identification

Pin Wire Color Circuit No. Function
A BN 669 Power Window Motor Left Rear Down Control
B - - Not Used
C D-GN 168 Power Window Master Switch Left Rear Up Signal
D D-BU 668 Power Window Motor Left Rear Up Control
E D-BU 1307 Power Window Master Switch Lockout Signal
F-G - - Not Used
H PU 169 Power Window Master Switch Left Rear Down Signal
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.