SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2006COBALT SS, 4D SEDAN, STANDARDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 486 (FIXED & MOVEABLE WINDOW SYSTEMS)COMPONENT LOCATORWINDOW SYSTEMS CONNECTORSWINDOW SWITCH - DRIVER (COUPE)
2006 Chevrolet Cobalt SS, 4D Sedan, Standard

Window Switch - Driver (Coupe)

2006 Chevrolet Cobalt SS, 4D Sedan, StandardSECTION Window Switch - Driver (Coupe)
WARNING: This page is about a different car, the 2007 Chevrolet Monte Carlo and 2007 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Window Switch - Driver (Coupe) Connector End Views
GM556473Courtesy of GENERAL MOTORS CORP.
Window Switch - Driver (Coupe) Connector Parts Information

Connector Part Information 
  • OEM: 15326924
  • Service: 15306174
  • Description: 8-Way F GT 280 Series, (BK)
Terminal Part Information 
  • Pins: A, C, D, F, G, H
  • Terminal/Tray: 15304713/19
  • Core/Insulation Crimp: F/D
  • Release Tool/Test Probe: 15315247/J-35616-4A (PU)
  • Pins: B
  • Terminal/Tray: 15304711/8
  • Core/Insulation Crimp: E/A
  • Release Tool/Test Probe: 15315247/J-35616-4A (PU)
Window Switch - Driver (Coupe) Connector Terminal Identification

Pin Wire Color Circuit No. Function
A L-BU 166 Power Window Master Switch Right Front Up Signal
B GY 8 Instrument Panel Lamp Supply Voltage
C YE 143 Accessory Voltage
D TN 167 Power Window Master Switch Right Front Down Signal
E - - Not Used
F BK 550 Ground
G D-BU 164 Power Window Motor Left Front Up Control
H BN 165 Power Window Motor Left Front Down Control
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.