SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2006COBALT SS, 4D SEDAN, STANDARDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 435 (ENGINE COOLING SYSTEM)SPECIFICATIONSFASTENER TIGHTENING SPECIFICATIONS
2006 Chevrolet Cobalt SS, 4D Sedan, Standard

Fastener Tightening Specifications

2006 Chevrolet Cobalt SS, 4D Sedan, StandardSECTION Fastener Tightening Specifications
WARNING: This page is about a different car, the 2006 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
Fastener Tightening Specifications

Application Specification
Metric English
Battery Terminal Bolt 17 N.m 13 lb ft
Crossover Pipe Bolts-L66 22 N.m 16 lb ft
ECT Sensor 18 N.m 13 lb ft
Exhaust Manifold Heat Shield Bolts - L61 25 N.m 18 lb ft
Thermostat Housing Bolts - L66 12 N.m 106 lb in
Thermostat Housing Cover-to-Thermostat Housing Bolts - L61 10 N.m 89 lb in
Thermostat Housing-to-Block Bolts - L61 10 N.m 89 lb in
Thermostat Pipe Bracket-to-Cylinder Head Bolt - L61 8 N.m 71 lb in
Water Pump Access Bolts-to-Front Cover - L61 10 N.m 89 lb in
Water Pump Bolts - L66 12 N.m 106 lb in
Water Pump Sprocket-to-Water Pump Bolts - L61 10 N.m 89 lb in
Wheel Nuts 125 N.m 92 lb ft
Wiring Harness Ground Terminal Nut 12 N.m 106 lb in
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.