Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2006COBALT SS, 4D SEDAN, STANDARDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 397 (WIRING SYSTEMS - SPECIFICATIONS, COMPONENT VIEWS AND CONNECTOR END VIEWS)COMPONENT LOCATORSPLICE PACK CONNECTOR END VIEWS
2006 Chevrolet Cobalt SS, 4D Sedan, Standard
Splice Pack Connector End Views
2006 Chevrolet Cobalt SS, 4D Sedan, StandardSECTION Splice Pack Connector End Views
WARNING: This page is about a different car, the 2006 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
Splice Pack SP101 (G101)
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A-B | BK | 150 | Ground |
| C-D | BK | 150 | Ground (L66) |
| E-F | BK | 150 | Ground |
| G-H | - | - | Not Used (Ground) |
| J | BK | 150 | Ground (L66) |
| K-L | BK | 150 | Ground |
| M | - | - | Not Used (Ground) |
Splice Pack SP113 (w/L66)
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| 1-5 | WH | 5290 | Ignition 1 Voltage |
| 6-12 | WH | 5290 | Ignition 1 Voltage |
| 13-19 | RD | 39 | Ignition 1 Voltage |
| 20-23 | YE/BU | 605 | 5-Volt Reference A |
| 24 | - | - | 5-Volt Reference A - Not Used |
Splice Pack SP114 (w/L66)
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| 1-5 | WH | 5291 | Ignition 1 Voltage |
| 6-12 | BK | 450 | Ground |
| 13-15 | BN/YE | 451 | Ground |
| 16-18 | GN/YE | 2751 | Low Reference |
| 19-21 | YE/RD | 474 | 5-Volt Reference A |
| 22-24 | BU/WH | 2182 | Reverse Lamp Relay Control |
Splice Pack SP201 (G201)
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | BK/WH | 151 | Ground |
| BK/WH | 151 | Ground (ASF w/o HEG) | |
| B-H | BK/WH | 151 | Ground |
| J | BK/WH | 151 | Ground |
| BK/WH | 151 | Ground (ASF w/o HEG) | |
| K | BK/WH | 151 | Ground |
| L | BK/WH | 151 | Ground |
| BK/WH | 151 | Ground (ASF w/o HEG) | |
| M | - | - | Not Used (Ground) |
Splice Pack SP205 (G205) (JM4)
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A-B | BK | 350 | Ground |
| C-M | - | - | Not Used (Ground) |
Splice Pack SP301 (G301)
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A-B | BK | 650 | Ground |
| C | BK | 650 | Ground |
| BK | 650 | Ground | |
| D-E | BK | 650 | Ground |
| F | BK | 650 | Ground (KA1) |
| BK | 650 | Ground (KA1) | |
| G | BK | 650 | Ground (KA1) |
| BK | 650 | Ground (KA1) | |
| H | BK | 650 | Ground |
| BK | 650 | Ground (L61 w/ MN5) | |
| J | BK | 650 | Ground (D22/DG7) |
| K | BK | 650 | Ground |
| L | BK | 650 | Ground (AG1) |
| M | BK | 650 | Ground |
Splice Pack SP401 (G401)
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | - | - | Not Used (Ground) |
| B | BK | 750 | Ground |
| C | - | - | Not Used (Ground) |
| D | BK | 750 | Ground (w/CF5) |
| E-G | - | - | Not Used (Ground) |
| H | BK | 750 | Ground |
| J | BK | 750 | Ground |
| K-M | - | - | Not Used (Ground) |
Splice Pack SP403 (G403)
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A-B | BK | 850 | Ground |
| C | BK | 850 | Ground (WBM) |
| D-M | - | - | Not Used (Ground) |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.