Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2006COBALT SS, 4D SEDAN, STANDARDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 395 (CELLULAR COMMUNICATION SYSTEM)DIAGNOSTIC INFORMATION AND PROCEDURESSCAN TOOL DATA LIST
2006 Chevrolet Cobalt SS, 4D Sedan, Standard
Scan Tool Data List
2006 Chevrolet Cobalt SS, 4D Sedan, StandardSECTION Scan Tool Data List
WARNING: This page is about a different car, the 2006 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
Scan Tool Data List
| Scan Tool Parameter | Data List | Units Displayed | Typical Data Value |
|---|---|---|---|
| Ignition ON with Engine OFF | |||
| 8-Digit GM Part Number | Module 2 | 8 Digits | 93807890 |
| Component Serial Number 13-16 | Module 1 | 4 Digits | 0007 |
| Date | GPS Data | Date | DD/MM/YY |
| Electronic Serial Number | Module 2 | 11 Digits | 16832516749 |
| GPS Signal | GPS Data | Yes/No | Yes |
| Julian Date of Build | Module 1 | 3 Digits | 067 |
| Module ID | Module 2 | Alpha-numeric | Generation 6 |
| Signal Strength | Signal Strength | 0-100 | 68 |
| Signal Type | Signal Strength | Analog/Digital | Digital |
| Software ID | Module 1 | 3 Digits | 146 |
| Time | GPS Data | Time | HH:MM:SS |
| Transceiver ID | Signal Strength | 2-5 Digits | Varies |
| VCI Module Station ID | Module 2 | 10 Digits | 0002086783 |
| Year Module Built | Module 1 | 4 Digits | 2001 |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.