SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2006COBALT SS, 4D SEDAN, STANDARDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 39 (ANTILOCK BRAKE SYSTEM AND TRACTION CONTROL SYSTEM)COMPONENT LOCATORABS CONNECTOR END VIEWS
2006 Chevrolet Cobalt SS, 4D Sedan, Standard

ABS Connector End Views

2006 Chevrolet Cobalt SS, 4D Sedan, StandardSECTION ABS Connector End Views
WARNING: This page is about a different car, the 2005 Saturn L300. However, it is still accessible from the selected car via links, so may be relevant.
Electronic Brake Control Module (EBCM)

GM886451Courtesy of GENERAL MOTORS CORP.
Connector Part Information
  • 15326596
  • 31-Way F Standard Power Timer Sealed (BK)
Pin Wire Color Circuit No. Function
1 WH 883 Right Rear Wheel Speed Sensor Low Reference
2 BN 882 Right Rear Wheel Speed Sensor Signal
3 TN 833 Right Front Wheel Speed Sensor Low Reference
4 - - Not Used
5 D-GN 872 Right Front Wheel Speed Sensor Signal
6 YE 873 Left Front Wheel Speed Sensor Low Reference
7 L-BU 830 Left Front Wheel Speed Sensor Signal
8 RD 885 Left Rear Wheel Speed Sensor Low Reference
9 BK 884 Left Rear Wheel Speed Sensor Signal
10 - - Not Used
11 L-BU 1276 ABS Serial Data K-Line
12 - - Not Used
13 OG/BK 463 Requested Torque Signal
14 L-BU 20 Stop Lamp Switch Signal
15 PK 339 Ignition 1 Voltage
16 BK 150 Ground
17 RD 702 Battery Positive Voltage
18 OG 1002 Battery Positive Voltage
19 BK 150 Ground
20 L-BU 832 Traction Control Active Signal
21 L-GN 867 ABS Indicator Failure Control
22-25 - - Not Used
26 WH 1909 Right Front Wheel Speed Sensor Signal
27 TN/BK 464 Delivered Torque Signal
28 WH 2192 Traction Ready Indicator Control
29 - - Not Used
30 WH 121 Engine Speed Signal
31 L-BU 1788 Traction Control Switch Signal
Right Heated Seat/Traction Switch

GM62439Courtesy of GENERAL MOTORS CORP.
Connector Part Information
  • 12047886
  • 8-Way F Metri-Pack 150 Series (BK)
Pin Wire Color Circuit No. Function
A BN 641 Ignition 3 Voltage
B D-BU 1660 Traction Control Indicator Control
C L-BU 1788 Traction Control Switch Signal
D GY 8 Instrument Panel Lamps Dimmer Switch Signal
E BK 550 Ground
F PK/BK 1503 Passenger Heated Seat High/Low Signal
G L-GN 559 Heated Occupant Sensor Signal
H - - Not Used
Stop Lamp Switch

GM1341509Courtesy of GENERAL MOTORS CORP.
Connector Part Information
  • 15317343
  • 4-Way F Standard Power Timer (BK)
Pin Wire Color Circuit No. Function
1-2 - - Not Used
3 L-BU 20 Stop Lamp Switch Signal
4 OG 540 Battery Positive Voltage
Wheel Speed Sensor (WSS) - LF

GM890607Courtesy of GENERAL MOTORS CORP.
Connector Part Information
  • 15358647
  • 2-Way M (NA)
Pin Wire Color Circuit No. Function
1 YE 873 Left Front Wheel Speed Sensor Low Reference
2 D-GN 830 Left Front Wheel Speed Sensor Signal
Wheel Speed Sensor (WSS) - LR

GM537107Courtesy of GENERAL MOTORS CORP.
Connector Part Information
  • 12052644
  • 2-Way F Metri-Pack 150 Series Sealed (GN)
Pin Wire Color Circuit No. Function
A BK 884 Left Rear Wheel Speed Sensor Low Reference
B RD 885 Left Rear Wheel Speed Sensor Signal
Wheel Speed Sensor (WSS) - RF

GM890607Courtesy of GENERAL MOTORS CORP.
Connector Part Information
  • 15358648
  • 2-Way M (NA)
Pin Wire Color Circuit No. Function
1 TN 833 Right Front Wheel Speed Sensor Low Reference
2 D-GN 872 Right Front Wheel Speed Sensor Signal
Wheel Speed Sensor (WSS) - RR

GM537107Courtesy of GENERAL MOTORS CORP.
Connector Part Information
  • 12052644
  • 2-Way F Metri-Pack 150 Series Sealed (GY)
Pin Wire Color Circuit No. Function
A BN 882 Right Rear Wheel Speed Sensor Low Reference
B WH 883 Right Rear Wheel Speed Sensor Signal
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.