SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2006COBALT SS, 4D SEDAN, STANDARDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 324 (COMPUTER/INTEGRATING SYSTEMS)COMPONENT LOCATORCOMPUTER/INTEGRATING SYSTEMS CONNECTORSBODY CONTROL MODULE (BCM) C7
2006 Chevrolet Cobalt SS, 4D Sedan, Standard

Body Control Module (BCM) C7

2006 Chevrolet Cobalt SS, 4D Sedan, StandardSECTION Body Control Module (BCM) C7
WARNING: This page is about a different car, the 2006 Chevrolet Monte Carlo and 2006 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Body Control Module C7 Connector End Views
GM1664505Courtesy of GENERAL MOTORS CORP.
Computer/Integrating Systems Connector End Views

Connector Part Information 
  • OEM: 15466053
  • Service: See Catalog
  • Description: 28-Way F Receptacle 0.64 (GY)
Terminal Part Information 
  • Pins: 2, 6, 7, 9, 11, 12, 23
  • Terminal/Tray: SNAC3-A021T-M0.64/20
  • Core/Insulation Crimp: J/J
  • Release Tool/Test Probe: 12094429/J-35616-64A (L-BU)
Body Control Module (BCM) C7

Pin Wire Color Circuit No. Function
1 - - Not Used
2 L-BU 1344 Trunk Release Relay Control
2 TN/WH 56 Trunk Release Motor [Control or Supply Voltage]
3-5 - - Not Used
6 YE 356 Driver Door Lock Relay Unlock Control
7 L-GN 1391 Driver Door Unlock Relay Control
8 - - Not Used
9 L-BU 5921 Door Unlock Relay Control
10 - - Not Used
11 OG/BK 781 Driver Door Lock Switch Unlock Signal
12 OG/BK 780 Driver Door Lock Switch Lock Signal
13-22 - - Not Used
23 TN 126 Left Front Door Open Switch Signal
24-28 - - Not Used
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.