SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2006COBALT SS, 4D SEDAN, STANDARDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 29 (BODY REAR END)SPECIFICATIONSFASTENER TIGHTENING SPECIFICATIONS
2006 Chevrolet Cobalt SS, 4D Sedan, Standard

Fastener Tightening Specifications

2006 Chevrolet Cobalt SS, 4D Sedan, StandardSECTION Fastener Tightening Specifications
WARNING: This page is about a different car, the 2005 Saturn L300. However, it is still accessible from the selected car via links, so may be relevant.
Fastener Tightening Specifications

Application Specification
Metric English
Fuel Tank Filler Door Bolts 10 N.m 89 lb in
Lift Gate Handle Fasteners 53 N.m 27 lb in
Lift Gate Lock Cylinder to Lift Gate Nuts 3 N.m 27 lb in
Rear Compartment Lid Applique Fasteners 5 N.m 43 lb in
Rear Compartment Lid to Body Bolts 25 N.m 19 lb ft
Rear Compartment Lid to Hinge Bolts 10 N.m 89 lb in
Rear Compartment Lid to Latch Bolts 10 N.m 89 lb in
Spoiler to Rear Compartment Lid Fasteners 5 N.m 44 lb in
Wheelhouse to Fascia Fasteners 2.8 N.m 25 lb in
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.