Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2006COBALT SS, 4D SEDAN, STANDARDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 259 (SEAT SYSTEM)SPECIFICATIONSFASTENER TIGHTENING SPECIFICATIONS
2006 Chevrolet Cobalt SS, 4D Sedan, Standard
Fastener Tightening Specifications
2006 Chevrolet Cobalt SS, 4D Sedan, StandardSECTION Fastener Tightening Specifications
WARNING: This page is about a different car, the 2006 Buick LaCrosse and 2006 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
Fastener Tightening Specifications
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Actuator Motor Bracket to Seat Adjuster Nut | 10 N.m | 89 lb in |
| Adjuster to Floorpan Bolts | 42 N.m | 31 lb ft |
| Adjuster Track Cover Screws | 2 N.m | 18 lb in |
| Armrest Base Cover Screws | 3 N.m | 27 lb in |
| Armrest Pivot Screw | 10 N.m | 89 lb in |
| Armrest Support Bracket Bolts | 3 N.m | 27 lb in |
| Bolster Bolts | 8 N.m | 71 lb in |
| Child Seat Latch Bracket Bolt | 42 N.m | 31 lb ft |
| Child Seat Latch Bracket Nut | 42 N.m | 31 lb ft |
| Crossbrace Bolts | 6 N.m | 53 lb in |
| Front Seat Armrest Bolts (Front Set, Rear Set) | 10 N.m | 89 lb in |
| Front Seat Cushion frame Bolts | 24 N.m | 18 lb ft |
| Front Seat Back Hinge Bolts | 24 N.m | 18 lb ft |
| Front Seat Belt Bracket Bolt | 42 N.m | 31 lb ft |
| Front Seat Retractor Side Belt Anchor Nut | 42 N.m | 31 lb ft |
| Rear Seat Back Anchor Nuts | 10 N.m | 89 lb in |
| Rear Seat Back Latch Bolts | 10 N.m | 89 lb in |
| Rear Split Folding Seat Back Pivot Bolts | 24 N.m | 18 lb ft |
| Recliner to Seat Frame Pivot Bolts | 24 N.m | 18 lb ft |
| Seat Belt Guide Screws | 3 N.m | 27 lb in |
| Seat Frame Bolts | 25 N.m | 18 lb ft |
| Vertical Actuator Screws | 6 N.m | 53 lb in |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.