Power Seat Systems Connector End Views

2006 Chevrolet Cobalt SS, 4D Sedan, StandardSECTION Power Seat Systems Connector End Views
WARNING: This page is about a different car, the 2005 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
Heated Seat Switch - Driver (w/KA1)

GM40446Courtesy of GENERAL MOTORS CORP.
Connector Part Information
  • 12177194
  • 6-Way F Metri-Pack 150 Series (NA)
Pin Wire Color Circuit Number Function
A PK 1501 Driver Heated Seat High/Low Signal
B GY 8 Instrument Panel Lamps Dimmer Switch Signal
C - - Not Used
D BN 141 Ignition 1 Voltage
E BK 650 Ground
F L-BU 1462 Driver Heated Seat Switch Signal
Heated Seat Switch - Front Passenger (w/KA1)

GM304345Courtesy of GENERAL MOTORS CORP.
Connector Part Information
  • 12177195
  • 6-Way F Metri-Pack 150 Series (BK)
Pin Wire Color Circuit Number Function
A PK/BK 1503 Front Passenger Heated Seat High/Low Signal
B GY 8 Instrument Panel Lamps Dimmer Switch Signal
C - - Not Used
D BN 141 Ignition 1 Voltage
E BK 650 Ground
F L-BU/BK 1505 Front Passenger Heated Seat Switch Signal
Heated Seat Module - Driver C1 (w/KA1)

GM1283909Courtesy of GENERAL MOTORS CORP.
Connector Part Information
  • 7283-5629-40
  • 4-Way F (GY)
Pin Wire Color Circuit Number Function
1 BK 650 Ground
2 PK 1501 Driver Heated Seat High/Low Signal
3 L-BU 1462 Driver Heated Seat Switch Signal
4 OG 1540 Battery Positive Voltage
Heated Seat Module - Driver C2 (Heated Seat Cushion Pigtail) (w/KA1)

GM1283909Courtesy of GENERAL MOTORS CORP.
Connector Part Information
  • 7283-5630-60
  • 4-Way F (GN)
Pin Wire Color Circuit Number Function
1 RD - H1 Signal
2 GY - Low Reference
3 GY - Temperature Sensor Signal
4 BK - H2 Signal
Heated Seat Module - Driver C3 (Heated Seat Back Pigtail) (w/KA1)

GM811182Courtesy of GENERAL MOTORS CORP.
Connector Part Information
  • 7283-5579-40
  • 2-Way F (GY)
Pin Wire Color Circuit Number Function
1 BK - H2 Control
2 BK - H2 Signal
Heated Seat Module - Front Passenger C1 (w/KA1)

GM1283909Courtesy of GENERAL MOTORS CORP.
Connector Part Information
  • 7283-5629-40
  • 4-Way F (GY)
Pin Wire Color Circuit Number Function
1 BK 650 Ground
2 PK/BK 1503 Front Passenger Heated Seat High/Low Signal
3 L-BU/BK 1505 Front Passenger Heated Seat Switch Signal
4 OG 1540 Battery Positive Voltage
Heated Seat Module - Front Passenger C2 (Heated Seat Cushion Pigtail) (w/KA1)

GM1283909Courtesy of GENERAL MOTORS CORP.
Connector Part Information
  • 7283-5630-60
  • 4-Way F (GN)
Pin Wire Color Circuit Number Function
1 RD - H1 Signal
2 GY - Low Reference
3 GY - Temperature Sensor Signal
4 BK - H2 Signal
Heated Seat Module - Front Passenger C3 (Heated Seat Back Pigtail) (w/KA1)

GM811182Courtesy of GENERAL MOTORS CORP.
Connector Part Information
  • 7283-5579-40
  • 2-Way F (GY)
Pin Wire Color Circuit Number Function
1 BK - H2 Control
2 BK - H2 Signal
Seat Adjuster Switch - Driver (w/AG1)

GM556473Courtesy of GENERAL MOTORS CORP.
Connector Part Information
  • 15326924
  • 8-Way F GT 280 Series (BK)
Pin Wire Color Circuit Number Function
A D-GN 286 Seat Front Vertical Down Control
B BK 650 Ground
C RD 285 Seat Horizontal Forward Control
D OG 1240 Battery Positive Voltage
E YE 282 Seat Rear Vertical Up Control
F BK 284 Seat Horizontal Rearward Control
G L-BU 283 Seat Rear Vertical Down Control
H D-BU 287 Seat Front Vertical Down Control
Seat Recline Motor - Driver (w/AG1)

GM811182Courtesy of GENERAL MOTORS CORP.
Connector Part Information
  • 811860
  • 2-Way F (BK)
Pin Wire Color Circuit Number Function
1 L-BU 283 Seat Rear Vertical Down Control
2 YE 282 Seat Rear Vertical Up Control
Seat Vertical Motor - Driver (w/AG1)

GM811182Courtesy of GENERAL MOTORS CORP.
Connector Part Information
  • 811860
  • 2-Way F (BK)
Pin Wire Color Circuit Number Function
1 D-BU 287 Seat Front Vertical Down Control
2 D-GN 286 Seat Front Vertical Down Control
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.