Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2006COBALT SS, 4D SEDAN, STANDARDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 166 (ENGINE CONTROLS - 3.5L (L66) INTRODUCTION)SPECIFICATIONSFASTENER TIGHTENING SPECIFICATIONS
2006 Chevrolet Cobalt SS, 4D Sedan, Standard
Fastener Tightening Specifications
2006 Chevrolet Cobalt SS, 4D Sedan, StandardSECTION Fastener Tightening Specifications
WARNING: This page is about a different car, the 2005 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
Fastener Tightening Specifications
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Accelerator Pedal Position (APP) Assembly Bracket Fastener | 25 N.m | 18 lb. ft. |
| Air Cleaner Assembly Fastener | 10 N.m | 89 lb. in. |
| Air Cleaner Inlet Duct Fastener | 10 N.m | 89 lb. in. |
| Air Cleaner Outlet Resonator Duct Clamp | 4 N.m | 35 lb. in. |
| Air Cleaner Outlet Resonator Duct Fastener | 10 N.m | 89 lb. in. |
| Camshaft Position (CMP) Sensor Fastener | 4 N.m | 35 lb. ft. |
| Crankshaft Position (CKP) Sensor Fastener | 9.8 N.m | 88 lb. in. |
| Engine Coolant Temperature (ECT) Sensor | 18 N.m | 13 lb. ft. |
| Evaporative Emission (EVAP) Canister Purge Valve Fastener | 9.8 N.m | 88 lb. in. |
| EVAP Canister Support Cover Fastener | 8 N.m | 71 lb. in. |
| Exhaust Gas Recirculation (EGR) Valve | 22 N.m | 16 lb. ft. |
| Fuel Filler Pipe Bracket Fastener-Lower | 10 N.m | 89 lb. in. |
| Fuel Filler Pipe Bracket Fastener-Upper | 2.5 N.m | 17 lb. in. |
| Fuel Rail Fastener | 9.8 N.m | 87 lb. in. |
| Fuel Rail Inlet Pipe Fastener | 9.8 N.m | 87 lb. in. |
| Fuel Tank Retaining Strap Fastener | 25 N.m | 18 lb. ft. |
| Heated Oxygen Sensor (HO2S) 1 | 44 N.m | 32 lb. ft. |
| Heated Oxygen Sensor (HO2S) 2 | 44 N.m | 32 lb. ft. |
| Ignition Coil Fastener | 12 N.m | 8.8 lb. ft. |
| Intake Air Temperature (IAT) Sensor 2 | 18 N.m | 13 lb. ft. |
| Intake Manifold Cover Fasteners | 12 N.m | 8.8 lb. ft. |
| Knock Sensor (KS) Nut | 31 N.m | 16 lb. ft. |
| Manifold Absolute Pressure (MAP) Sensor Fastener | 4 N.m | 35 lb. in. |
| Negative Battery Cable Terminal Retainer Fastener | 17 N.m | 13 lb. ft. |
| Positive Crankcase Ventilation (PCV) Valve Bolt | 12 N.m | 8.8 lb. ft. |
| Powertrain Control Module (PCM) Mounting Fastener | 12 N.m | 8.8 lb. ft. |
| Rocker Arm Oil Control Solenoid Valve Bolt | 12 N.m | 8.8 lb. ft. |
| Rocker Arm Oil Pressure Switch | 22 N.m | 16 lb. ft. |
| Spark Plug | 18 N.m | 13 lb. ft. |
| Throttle Body Fasteners | 22 N.m | 16 lb. ft. |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.